2019 China New Design High Hardness Two Component System - Doncool 105 HFC-365mfc base blend polyols – INOV
2019 China New Design High Hardness Two Component System - Doncool 105 HFC-365mfc base blend polyols – INOV Detail:
Doncool 105 HFC-365mfc base blend polyols
INTRODUCTION
DonCool 105 blend polyols use HFC-365mfc/227ea(93/7) as blowing agent, it applies to refrigerators, freezers, Air conditioning boards and other products thermal insulation.
PHYSICAL PROPERTY
| Appearance |
Light yellow transparent liquid |
| Hydroxyl Value mgKOH/g |
300-400 |
| Dynamic Viscosity /25℃ mPa.s |
400-500 |
| Specific Gravity /20℃ g/ml |
1.10-1.15 |
| Storage Temperature ℃ |
10-30 |
| Shelf life ※ Month |
6 |
※Store in dry original drums/IBCs at recommended storage temperature.
RECOMMENDED RATIO
|
pbw |
|
| DonCool 105 blend polyols |
100 |
| ISO |
130-135 |
TECHNOLOGY AND REACTIVITY CHARACTERISTICS (Material Temperature is 20℃, the actual value varied as per process conditions)
|
Manual Mixing（low pressure machine) |
High Pressure Machine Mixing |
|
| Cream Time s
Gel time s Tack free time s Free density kg/m3 |
10-14 65-85 100-130 26-28 |
6-10 45-60 70-100 25-27 |
FOAM PERFORMANCES
| Moulding Density | GB/T 6343 | 34-36kg/m3 |
| Closed-cell rate | GB/T 10799 | ≥90% |
| Thermal Conductivity（10℃） | GB/T 3399 | ≤21 mW/(m.K) |
| Compressive strength | GB/T 8813 | ≥150kPa |
| Dimensional stability 24h -20℃ | GB/T 8811 | ≤1.0% |
|
24h 100℃ |
≤1.5% |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
"Sincerity, Innovation, Rigorousness, and Efficiency" is definitely the persistent conception of our corporation to the long-term to establish alongside one another with customers for mutual reciprocity and mutual profit for 2019 China New Design High Hardness Two Component System - Doncool 105 HFC-365mfc base blend polyols – INOV , The product will supply to all over the world, such as: Armenia, Florence, Brazil, So far our products have been exported to east Europe, the Middle East, Southeast, Africa and South America etc. We have 13years professional sales and purchase in Isuzu parts at home and abroad and the ownership of the modernized electronic Isuzu parts checking systems. We honor our core principal of Honesty in business, priority in service and will do our best to offer our customers with high quality products and excellent service.
By Ivy from Atlanta - 2018.05.15 10:52
The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.
By Page from Spain - 2018.09.29 13:24
