2019 China New Design High Hardness Two Component System - Doncool 104 HFC-245fa base blend polyols – INOV
2019 China New Design High Hardness Two Component System - Doncool 104 HFC-245fa base blend polyols – INOV Detail:
Doncool 104 HFC-245fa base blend polyols
INTRODUCTION
DonCool 104 blend polyols premixed with HFC-245fa as blowing agent, it applies to refrigerators, freezers, electric water heaters and other products thermal insulation.
PHYSICAL PROPERTY
| Appearance |
Light yellow transparent liquid |
| Hydroxyl Value mgKOH/g |
200-400 |
| Dynamic Viscosity /25℃ mPa.s |
400-600 |
| Specific Gravity /20℃ g/ml |
1.10-1.15 |
| Storage Temperature ℃ |
10-20 |
| Shelf life ※ Month |
6 |
※Store in dry original drums/IBCs at recommended storage temperature.
RECOMMENDED RATIO
|
pbw |
|
| DonCool 104 blend polyols |
100 |
| ISO |
120-130 |
TECHNOLOGY AND REACTIVITY CHARACTERISTICS (Material Temperature is 20℃, the actual value varied as per process conditions)
|
Manual Mixing（low pressure machine) |
High Pressure Machine Mixing |
|
| Cream Time s
Gel time s Tack free time s Free density kg/m3 |
10-14 65-85 100-130 26-28 |
6-10 45-60 70-100 25-27 |
FOAM PERFORMANCES
| Moulding Density | GB/T 6343 | 35-37kg/m3 |
| Closed-cell rate | GB/T 10799 | ≥90% |
| Thermal Conductivity（10℃） | GB/T 3399 | ≤19 mW/(m.K) |
| Compressive strength | GB/T 8813 | ≥130kPa |
| Dimensional stability 24h -20℃ | GB/T 8811 | ≤1.0% |
|
24h 100℃ |
≤1.5% |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
Our well-equipped facilities and exceptional good quality manage throughout all stages of production enables us to guarantee total shopper satisfaction for 2019 China New Design High Hardness Two Component System - Doncool 104 HFC-245fa base blend polyols – INOV , The product will supply to all over the world, such as: Muscat, Egypt, panama, We have a good reputation for stable quality products, well received by customers at home and abroad. Our company would be guided by the idea of "Standing in Domestic Markets, Walking into International Markets". We sincerely hope that we could do business with car manufacturers, auto part buyers and the majority of colleagues both at home and abroad. We expect sincere cooperation and common development!
By Cornelia from Pretoria - 2017.09.29 11:19
We are a small company that has just started, but we get the company leader's attention and gave us a lot of help. Hope we can make progress together!
By Leona from Greenland - 2018.11.28 16:25
