China 2019 China New Design High Hardness Two Component System - Doncool 103 CP/IP base blend polyols – INOV Manufacturer and Supplier

2019 China New Design High Hardness Two Component System - Doncool 103 CP/IP base blend polyols – INOV

Short Description:

Product Detail

Product Tags

Feedback (2)

Our pursuit and enterprise aim would be to "Always fulfill our buyer requirements". We carry on to acquire and layout excellent quality items for the two our old and new clients and realize a win-win prospect for our shoppers in addition as us for Sorbital Base, Doncool 101 Water Base Blend Polyols, Rigid Foam Series, In case you are intrigued in any of our products or want to focus on a personalized get, please sense totally free to contact us. We're wanting ahead to forming successful enterprise relationships with new shoppers across the world during the in close proximity to long term.

2019 China New Design High Hardness Two Component System - Doncool 103 CP/IP base blend polyols – INOV Detail:

Doncool 103 CP/IP base blend polyols

INTRODUCTION

Doncool 103 is blend polyols uses CP or CP/IP as blowing agent, which applies to refrigerators, freezers, and other insulation products. The characteristics of the products are as follows

1. Excellent flow ability, the density of the foam is well-distributed, and the thermal conductivity is low

2. Excellent low-temperature dimensional stability and good cohesiveness;

3. Demoulding time is 6-8 minutes.

PHYSICAL PROPERTY

Appearance	Pale yellow transparent liquid
Hydroxyl value mgKOH/g	360-420
Dynamic viscosity（25℃） mPa.S	3000-4000
Specific gravity (20℃) g/ml	1.06-1.08
Storage temperature ℃	10-25
Pot life Month	6

RECOMMENDED RATIO

	pbw
Doncool 102	100
CP or CP/IP	12-14
Isocyanate	136-142

TECHNOLOGY AND REACTIVITY (the actual value varied as per process conditions)

	Manual mixing	High pressure machine
Material Temperature ℃	20-25	20-25
Mould Temperature ℃	35-40	35-40
Cream time s	12-16	8-12
Gel time s	75-85	50-70
Tack free time s	100-120	70-100
Free density kg/m³	25-26	24-25

FOAM PERFORMANCES

Mold density	GB/T 6343	≥35kg/m³
Closed-cell rate	GB/T 10799	≥90%
Thermal conductivity （15℃）	GB/T 3399	≤22 mW/(m.K)
Compression strength	GB/T8813	≥150kPa
Dimensional stability 24h -20℃	GB/T8811	≤0.5%
24h 100℃	GB/T8811	≤1.0%

The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.

Product detail pictures:

Related Product Guide:

We are proud of the high customer satisfaction and wide acceptance due to our persistent pursuit of high quality both on product and service for 2019 China New Design High Hardness Two Component System - Doncool 103 CP/IP base blend polyols – INOV , The product will supply to all over the world, such as: Casablanca, United Arab emirates, Georgia, More than 26 years, Professional companies from all over the world take us as their long-term and stable partners. We are keeping durable business relationship with more than 200 wholesalers in Japan, Korea, USA, UK, Germany, Canada, France, Italian, Poland, South Africa, Ghana, Nigeria etc.

Doncool 102 Hcfc-141b Base Blend Polyols

Doncool 103 Cp/Ip Base Blend Polyols

Donfoam 601 Water Base Blend Polyols

Donspray 504 Hfc-245fa Base Blend Polyols

Modified Silane Rasin.Water-Stop Groutings

Polyurethane Rigid Foam

Polyurethane Rigid Foam System

Pu Binder For Bonding Scrap Foam

Refrigerator&Insulation Containers

Thermoplastic Polyurethane Resin

Hope that the company could stick to the enterprise spirit of "Quality, Efficiency, Innovation and Integrity", it will be better and better in the future.

By Michaelia from Afghanistan - 2018.12.25 12:43

We have been cooperated with this company for many years, the company always ensure timely delivery ,good quality and correct number, we are good partners.

By Meredith from Brisbane - 2018.09.29 13:24

Write your message here and send it to us