2019 China New Design High Hardness Two Component System - Doncool 103 CP/IP base blend polyols – INOV
2019 China New Design High Hardness Two Component System - Doncool 103 CP/IP base blend polyols – INOV Detail:
Doncool 103 CP/IP base blend polyols
INTRODUCTION
Doncool 103 is blend polyols uses CP or CP/IP as blowing agent, which applies to refrigerators, freezers, and other insulation products. The characteristics of the products are as follows
1. Excellent flow ability, the density of the foam is well-distributed, and the thermal conductivity is low
2. Excellent low-temperature dimensional stability and good cohesiveness;
3. Demoulding time is 6-8 minutes.
PHYSICAL PROPERTY
Appearance |
Pale yellow transparent liquid |
Hydroxyl value mgKOH/g |
360-420 |
Dynamic viscosity(25℃) mPa.S |
3000-4000 |
Specific gravity (20℃) g/ml |
1.06-1.08 |
Storage temperature ℃ |
10-25 |
Pot life Month |
6 |
RECOMMENDED RATIO
|
pbw |
Doncool 102 |
100 |
CP or CP/IP |
12-14 |
Isocyanate |
136-142 |
TECHNOLOGY AND REACTIVITY (the actual value varied as per process conditions)
|
Manual mixing |
High pressure machine |
Material Temperature ℃ |
20-25 |
20-25 |
Mould Temperature ℃ |
35-40 |
35-40 |
Cream time s |
12-16 |
8-12 |
Gel time s |
75-85 |
50-70 |
Tack free time s |
100-120 |
70-100 |
Free density kg/m3 |
25-26 |
24-25 |
FOAM PERFORMANCES
Mold density | GB/T 6343 | ≥35kg/m3 |
Closed-cell rate | GB/T 10799 |
≥90% |
Thermal conductivity (15℃) | GB/T 3399 | ≤22 mW/(m.K) |
Compression strength | GB/T8813 | ≥150kPa |
Dimensional stability 24h -20℃ | GB/T8811 |
≤0.5% |
24h 100℃ |
≤1.0% |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
The organization upholds the philosophy of "Be No.1 in good quality, be rooted on credit history and trustworthiness for growth", will keep on to provide previous and new customers from home and overseas whole-heatedly for 2019 China New Design High Hardness Two Component System - Doncool 103 CP/IP base blend polyols – INOV , The product will supply to all over the world, such as: Cairo, Philippines, Birmingham, Our market share of our products and solutions has greatly increased yearly. If you are interested in any of our products or would like to discuss a custom order, make sure you feel free to contact us. We've been looking forward to forming successful business relationships with new clients around the world in the near future. We've been looking forward to your inquiry and order.
By Constance from St. Petersburg - 2018.08.12 12:27
This is a reputable company, they have a high level of business management, good quality product and service, every cooperation is assured and delighted!
By Caroline from Korea - 2018.06.30 17:29