2019 China New Design High Hardness Two Component System - Doncool 102 HCFC-141B base blend polyols – INOV
2019 China New Design High Hardness Two Component System - Doncool 102 HCFC-141B base blend polyols – INOV Detail:
Doncool 102 HCFC-141B base blend polyols
INTRODUCTION
DonCool 102 is blend polyols, uses the HCFC-141B as blowing agent, which is the substitution of CFC-11 in polyurethane industry, it applies to refrigerators, icebox and other thermal insulation products, the characteristics are as follows,
1. Excellent flow ability, foam density distributes uniformity, low thermal conductivity
2. Excellent low temperature dimension stability and cohesiveness
3. Demould time 6~8 minutes
PHYSICAL PROPERTY
Appearance |
Pale yellow transparent liquid |
Hydroxyl value mgKOH/g |
300-360 |
Dynamic viscosity(25℃) mPa.S |
250-500 |
Specific gravity (20℃) g/ml |
1.10-1.15 |
Storage temperature ℃ |
10-25 |
Pot life Month |
6 |
RECOMMENDED RATIO
|
pbw |
Doncool 102 |
100 |
POL: ISO |
1.0:1.1 |
TECHNOLOGY AND REACTIVITY (the actual value varied as per process conditions)
|
Manual mixing |
High pressure machine |
Material Temperature ℃ |
20-25 |
20-25 |
Mould Temperature ℃ |
35-40 |
35-40 |
Cream time s |
12±2 |
10±2 |
Gel time s |
70-90 |
50-70 |
Tack free time s |
100-120 |
80-100 |
Free density kg/m3 |
24-26 |
24-26 |
FOAM PERFORMANCES
Mold density | GB/T 6343 | ≥35kg/m3 |
Closed-cell rate | GB/T 10799 |
≥92% |
Thermal conductivity (15℃) | GB/T 3399 | ≤19 mW/(m.K) |
Compression strength | GB/T8813 | ≥150kPa |
Dimensional stability 24h -20℃ | GB/T8811 |
≤0.5% |
24h 100℃ |
≤1.0% |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
Our business puts emphasis over the administration, the introduction of talented staff, plus the construction of employees building, striving hard to boost the standard and liability consciousness of staff members. Our corporation successfully attained IS9001 Certification and European CE Certification of 2019 China New Design High Hardness Two Component System - Doncool 102 HCFC-141B base blend polyols – INOV , The product will supply to all over the world, such as: Frankfurt, Iran, Milan, With all these supports, we can serve every customer with quality product and timely shipping with highly responsibility. Being a young growing company, we might not the best, but we're trying our best to be your good partner.
By Alma from Mauritius - 2018.06.26 19:27
The customer service reprersentative explained very detailed, service attitude is very good, reply is very timely and comprehensive, a happy communication! We hope to have a opportunity to cooperate.
By Faithe from Armenia - 2018.04.25 16:46